M6/M8 - EM/ET

Why Mistral

MISTRAL is Paramina’s “petit’’ mobile high pressure piston compressor.
The unit is 3-staged, air cooled and easy to transport due to the built-in wheels.

MISTRAL provides a reliable source of breathing air due to the unique purification system (a coalescing prefilter installed before the active carbon/molecular sieve cartridge – hopcalite as an option). It is suitable for private divers, small diving shops, diving boats, yachts and small paintball teams

MISTRAL’s very low turning speed accomplishes low noise level, almost zero vibration and ensures long life operation.

M6/M8 - EM/ET

Why Mistral

MISTRAL is Paramina’s “petit’’ mobile high pressure piston compressor.
The unit is 3-staged, air cooled and easy to transport due to the built-in wheels.

MISTRAL’s very low turning speed accomplishes low noise level, almost zero vibration and ensures long life operation.

“All Mistral M6 models provide the lowest speed rotation of the market, @1200rpm”

M6/M8 - EM/ET

M6/M8 - BZ

Technical Data

● Oil capacity: 500ml special synthetic compressor oil.
● Permissible ambient temperature:+5 ºC to +45 ºC.

◆ Optional: Classic Version (LxWxH: 94x53x70 cm, 118 kg).

Combined Breathing Air Filter Ø 80x375

Adaptor DIN 300 to DIN 200 c/w safety valve

Design Specifications

Standard Equipment

Start/Stop Switch (electric version)
Motor Thermal overload protection (electric version)
Safety Valves in all stages
Hour Meter
2 Large Stainless SteelIntercoolers
Large Stainless Steel Aftercooler
3 Interstage Safety Valves
Condensate Separator after 2nd Stage
Pressure maintaining & non return valve
Combined Breathing Air Filter including Coalescing Prefilter (0,5 mg/m3 oil residual) & BA cartridge (Active Carbon, Molecular Sieve + Hopcalite as an option) providing clean air in accordance with EN 712021
Filling Hose (1,2m) complete with DIN and INTERNATIONAL ‘’A’’ Clamp Adaptor
Final stage manometer
Manual condensate drains

Optional Equipment

Automatic Stop
Automatic condensate Drains (electric versions)
Extra Filling Hose
Dual pressure filling facility, allowing 225/330 bar filling
1,5m air inlet hose with particle strainer
Safety Bleed valve in case of BA cartidge absence
Automatic Start (electric version)
Condensate collecting tank
Special Voltage / Frequency

mistral

	M6-EM, M8-EM, M6-ET, M8-ET	M6-BZ, M8-BZ
Start/Stop switch	●	■
Micronic air inlet filter	●	●
Pressure maintaining and non return valve for extended filtration	●	●
Condensate Separator after 2nd Stage	●	●
Combined BA Filter including Coalescing Pre-filter (0.5 mg/m3 oil residual) and B.A. cartridge (AC/MS + HP option), with the supply of absolutely clean air exceeding by far the requirements of EN12021	●	●
Safety Bleed valve in case of BA Cartridge absence	◆	◆
Large Stainless Steel Intercoolers – Aftercooler	●	●
Safety Valves in all stages	●	●
Kevlar filling hose (1.2m) with stainless steel fittings and DIN/INT’L connector	●	●
Electric hourmeter	●	■
Vibration hourmeter/service timer (Running hours, BA filter/oil service hours)	◆	●
Final stage Manometer	●	●
Manual condensate drains	●	●
Motor thermal overload protection	●	■
Automatic belt tensioning system	●	●
Automatic stop system	◆	◆
Automatic start system	◆	■
Automatic condensate drains with manual backups	◆	■
Dual pressure filling facility, allowing 225/330 bar alternative filling	◆	◆
Condensate collecting tank	◆	■
1.5m air inlet hose with particle strainer	◆	●
Special voltage/frequency: 3 x 230 V/ 60 Hz – 110 V / 60 Hz	●	■