GAS COMPRESSORS Models
Design Specifications
Inlet Solenoid valve |
Inlet Pressure regulator |
2 x Inlet pressure safety valves |
Inlet Pressure Manometer |
Inlet Pulsation chamber |
Inlet Safety Pressure Switch |
Inlet Vacuum Safety Pressure Switch |
Oversized Stainless Steel Intercoolers & Aftercooler in all stages for optimum cooling |
Advanced Design Cylinder Heads for optimum heat discharge |
Safety Valves in all stages |
Interstage and Final stage Condensate Separators |
Final Gas Purification Filter, including coalescing prefilter (0.5 mg/m3 oil residual) and 2x large AC/MS cartridges |
Large fan for high efficiency cooling of cylinders, intercoolers & aftercoolers, making the compressor capable for continuous operation |
Secondary fan with independent electric motor for extra cooling (available only for Cyclone Silent model) |
Zero Loss Automatic Condensate Drain system via condensate return piping system, back inside compressor’s crankcase |
Star/Delta starter system |
24V secondary voltage providing safety during routine operation |
Main Switch |
Emergency Stop button |
Advanced digital controller (available only for Typhoon Silent and Cyclone |
Automatic Start/Stop system at the desirable pressure |
Interstage pressure control with pressure sensors in all stages (available only for Typhoon Silent and Cyclone Silent models) |
High temperature alarm & shutdown error |
Oil pump lubrication (Optional) |
Low Oil level sensor alarm & shutdown error |
Hourmeter |
Motor thermal overload protection |
Voltage failure and Phase Rotation Safety device |
Interstage and Final Stage Manometers |
Built-In Vibration Pads |
Non return valve before the outlet |
Automatic belt tensioning system |
Soundproof insulation (available only for Typhoon Silent and Cyclone Silent models) |